CASTABLE RESINS
ETEC castable DLP resins address the three key issues with precision castings: achieving fine feature detail, an ash-free burnout cycle, and requiring minimal post-processing. ETEC DLP castable resins feature the highest wax content in the industry (90%), resulting in a clean casted part with no porosity or flashing – minimizing post-processing, and eliminating the need for filling voids.
EasyCast 2.0
Castable material with the highest wax content available in 3D printing
Easy Cast 2.0 is a breakthrough material for the high-speed printing of a castable models. Easy Cast 2.0 is a photopolymer with the highest wax content available in 3D printing today. What’s more, because of the addition of special hardeners, Easy Cast 2.0 delivers exceptionally crisp features, similar to ETEC’s low- and no-wax materials — from the smallest of pierced filigrees to the sharpest of corners on raised surfaces.
| MATERIAL PROPERTIES | VALUE |
| Viscosity | 200 cP at 30°C |
| Density | 1.08 g/cm^3 at 25°C |
| Color | Yellow |
WIC 100 Series
High-resolution, castable material with nano-wax for clean burn out
With 20% powder wax content, WIC 100 delivers fine print details and fast printing speeds, along with a standard wax burn-out cycle with regular gypsum investment. During the burn-out cycle, the nano-wax melts away first allowing the resin to burn off without excessive expansion.
| MATERIAL PROPERTIES | VALUE |
| Tensile strength | 14.8 MPa |
| Ignition Temperature | 300°C |
| Density | 1.32 g/cm^3 |
| Color | Green |